Satellite splitter/Combiner

Red Silurian · 03-10-2023 9:14am #1

Current setup

I have 2 cables coming from a wideband LNB on my sky dish to my Sky Q box

What I want to do

Operate a sky box and a freesat recordable box from a quad-lnb on the same satellite using the 2 existing cables. Plan is to re-route one of the cables inside the house to the freesat box.

In a past rental home the below product, or something very like it, was able to split 2 satellite signals that were being carried on one cable for use on a sky+ box

My question

Can I buy 4 of these products, two for the satellite dish end which will each combine two signals into a cable resulting in 4 signals across two cables. One of these cables is for the sky q and the other for the freesat box. The freesat and sky q will have the other 2 splitters which will split the 2 signals on one cable to two separate cables?

https://www.espares.ie/product/es1746572?utm_source=google+shopping&utm_medium=shopping&utm_campaign=google+shopping&gad=1&gclid=EAIaIQobChMIh_mi_77ZgQMV-4FQBh2I2wWLEAQYCCABEgLU1_D_BwE

Vic_08 · 03-10-2023 11:37am

No.

Glaceon · 03-10-2023 1:14pm

I think you can split a wideband LNB feed, you'd need to ensure that you have one of each feed going to both boxes. Unlike traditional (enhanced/universal) LNBs there's no band switching on wideband so I don't see why it wouldn't work.

Red Silurian · 03-10-2023 1:23pm

https://www.boards.ie/discussion/comment/121188468#Comment_121188468

Thanks, very informative, what product do I need instead so?

Red Silurian · 03-10-2023 1:24pm

https://www.boards.ie/discussion/comment/121188993#Comment_121188993

So what I'm looking to do is combine the 2 feeds into one cable and split them at the other... I know it's possible as I've seen it being done before, I'm just wondering if I have the correct product for it

Glaceon · 03-10-2023 1:32pm

No, you can't merge into one cable and split back out to two; you'd have to keep it in two separate cables at all times.

Red Silurian · 03-10-2023 1:39pm

https://www.boards.ie/discussion/comment/121189126#Comment_121189126

You can with the right equipment though, I've seen it with my own eyes

Glaceon · 03-10-2023 2:18pm

You could do it with a dSCR multiswitch (some support wideband LNBs) which would just use a single cable. But you'd also need a compatible receiver.

tech · 03-10-2023 9:30pm

if you get these you will be able to do it

I have single cables in all rooms, and connect the combiner in the attic and replace the face plate in the room, they work a treat and cheap as chips

https://www.freetv.ie/tv-aerial-and-satellite-combiner/

and

https://www.freetv.ie/diplexer-wall-plate/

The Cush · 04-10-2023 7:52am

https://www.boards.ie/discussion/comment/121191485#Comment_121191485

No, this won't work with wideband feeds. Both polarisation feed must be kept separate all the way from the LNB to the receiver.

Two options that I can think of are the dSCR multiswitchs mentioned above that combines both feeds (+ Saorview if required) onto a single cable (single cable routing SCR) to a compatible dSCR receiver like SkyQ and the new Freesat boxes. Receivers have to be switched to SCR mode in the settings.

dSCR multiswitches - https://whytetechnologies.com/series-d/

The other option would be a wideband splitter to feed the 2 receivers with 2 cables each, discussed here previously.

Satellite splitter/Combiner

Comments