Advertisement
If you have a new account but are having problems posting or verifying your account, please email us on hello@boards.ie for help. Thanks :)
Hello all! Please ensure that you are posting a new thread or question in the appropriate forum. The Feedback forum is overwhelmed with questions that are having to be moved elsewhere. If you need help to verify your account contact hello@boards.ie
Hi all! We have been experiencing an issue on site where threads have been missing the latest postings. The platform host Vanilla are working on this issue. A workaround that has been used by some is to navigate back from 1 to 10+ pages to re-sync the thread and this will then show the latest posts. Thanks, Mike.
Hi there,
There is an issue with role permissions that is being worked on at the moment.
If you are having trouble with access or permissions on regional forums please post here to get access: https://www.boards.ie/discussion/2058365403/you-do-not-have-permission-for-that#latest

I am looking for ( x ) in Galway city&county

1131133135136137

Comments

  • Registered Users, Registered Users 2 Posts: 13,259 ✭✭✭✭flazio


    All methods for quicker retrieval of a package are listed on the site with the parcel tracking number, for sending packages out via DHL you can do that in a Post office.



  • Registered Users, Registered Users 2 Posts: 3,410 ✭✭✭fergiesfolly


    Thanks. Had a missed delivery yesterday but it was actually An Post that delivered, not DHL. There was no mention of An Post anywhere on the delivery. Several phone calls later and finally got a delivery time.



  • Registered Users Posts: 5,681 ✭✭✭obi604


    Hi,

    I need the rear brake pads replaced in my car before a 230km journey in the coming days

    Is anyone aware of any place in Galway open on 26th, 27th or 28th December that would do this? (I know part will have to be ordered in first etc which will cause extra time)

    Post edited by obi604 on


  • Registered Users, Registered Users 2 Posts: 13,259 ✭✭✭✭flazio


    I think you might have a better chance of renting a Go Car



  • Registered Users, Registered Users 2 Posts: 26,100 ✭✭✭✭Mrs OBumble


    They do have a GoFar option, but even so 230km is a lot once you're paying for mileage - and bookings are hard to get now.



  • Advertisement
  • Registered Users Posts: 5,681 ✭✭✭obi604


    Rang about 15 places yesterday. As expected, most were not open. Ones that were open were only doing pure tyre work.

    In the end Craughwell tyres did the job, so kudos to them.



  • Registered Users, Registered Users 2 Posts: 4,178 ✭✭✭Bredabe


    What's happening with the food truck in Riverside? the pink one opposite the tile shop. I've not seen them open for ages and I can't find any social media for them.

    "Have you ever wagged your tail so hard you fell over"?-Brod Higgins.



  • Registered Users, Registered Users 2 Posts: 696 ✭✭✭houseyhouse


    I’m looking for an affordable storage facility in or near the city. Barrons are looking for €400/month for a 100 square foot space , which seems very high



  • Registered Users, Registered Users 2 Posts: 1,979 ✭✭✭Citizenpain


    Looking for a recommendation for someone to service an electric Henderson garage roller door . I’m on east side of city .



  • Advertisement
  • Registered Users, Registered Users 2 Posts: 503 ✭✭✭rustyfrog


    I get occasional cravings for the Spud House, formerly of Lwr Newcastle. Is there anywhere in the city doing good loaded baked potatoes?



  • Registered Users, Registered Users 2 Posts: 26,185 ✭✭✭✭zell12




  • Registered Users Posts: 278 ✭✭geekychick


    I’m looking for a floor (laminates) fitter. I need someone who comes highly recommeneded and ideally I’d be able to go and check out a previous piece of work they’d done. The reason I’m being “demanding”, if that is the right word, is that I know someone who has just had their floor fitted and it was a scarcely believable nightmare for her, with two different tradesmen involved and neither one of them did a good job of it. And once it’s done, there is no turning back. So now I’m feeling spooked altogether.

    I want someone who can make the floor “flow” through the area, rather than putting in deviders between the rooms, and who will take care to cut the planks to fit well, rather than ending up leaving gaps between the floor and the skirting boards (!). Also, they preferably won’t be in such a hurry wrenching the skirting boards off the walls that they make holes in the walls (yes, that happened as well…..).

    TIA



  • Registered Users Posts: 278 ✭✭geekychick


    I’m looking for a good floor (laminates) fitter. I need someone who comes highly recommeneded and ideally I’d be able to go and check out a previous piece of work they’d done. The reason I’m being “demanding”, if that is the right word, is that I know someone who has just had their floor fitted and it was a scarcely believable nightmare for her, with two different tradesmen involved and neither one of them did a good job of it. And once it’s done, there is no turning back. So now I’m feeling spooked altogether.

    I want someone who can make the floor “flow” through the area, rather than putting in dividers between the rooms, and who will take care to cut the planks to fit well, rather than ending up leaving gaps between the floor and the skirting boards (!). Also, they preferably won’t be in such a hurry wrenching the skirting boards off the walls that they make holes in the walls (yes, that happened as well…..).

    TIA

    Edit: people can PM me with a recommendation if preferable.

    Post edited by geekychick on


  • Registered Users, Registered Users 2 Posts: 599 ✭✭✭ottolwinner


    roof cleaning on a 2floor building. Possibly using scaffolding to access. Any recommended?



  • Registered Users, Registered Users 2 Posts: 599 ✭✭✭ottolwinner


    @geekychick do supplier companies of the flooring not have a list of reputable fitters?



  • Registered Users Posts: 278 ✭✭geekychick


    Yes, in the above-mentioned case one of the fitters came recommeneded by the supplier, however he was the one who made a hole in the wall. I’d say the guys who get work via these suppliers are very busy as they get recommended to most people buying the flooring, so they rush through jobs like there is no tomorrow, and I’m not up for dealing with the potential for damage to the property that is inherent in that approach.



  • Registered Users Posts: 87 ✭✭rorymagory



    i got laminate flooring from Tom Demspeys a few years ago and they arranged a carpenter to fit them. My floors are uneven and i'm happy with how they went down. Hopefully your issues haven't come from the same place! I'll PM you his info if you like.

    Leaving gaps between the floor and the skirting boards is bananas.



  • Registered Users, Registered Users 2 Posts: 798 ✭✭✭RonnieL


    I don't have a fitter I can recommend, but I did have a similar situation recently, and I can attest to the stress. We spent a fortune on expensive flooring, but the carpenter working for our builder made a mess of fitting them. If I could go back in time, I'd pay the place I bought the flooring from to fit it.

    Regarding the skirting - depending on how they were fixed to the walls, and how long they had been in place, it can be difficult and damaging to remove them, so I would forgive the fitter on that front. Gaps between boards however is another situation.



  • Registered Users Posts: 278 ✭✭geekychick


    Thank you, Ronnie. I’m so sorry to read about your experience - the kind I’m eager to avoid here.

    I’m very conscious not to clog up the thread with my fretting and moaning, though. 😂

    Any convo or recommendations or ideas, please feel free to shoot me a PM.

    Thanks all!!



  • Advertisement
  • Registered Users Posts: 4,819 ✭✭✭b.gud


    Not an expert, so take this with a grain of salt, but I have done a good bit of research into laying laminate flooring as I was doing it myself when we moved into our house.

    From what I researched gaps between the floor and the wall, or in this case the skirting board, is necessary. If I remember correctly this is to allow for some movement in the boards that can be caused by temperature changes. This is also why the boards should be left where they are going to be played for a couple of days to acclimatise to the room.

    However there should be no visible gap after the fitting as the installer should tell you this before the job and recommend either covering with a beading or the completely replace the skirting. You could reuse the existing skirting but as noted earlier depending on how it was attached previously this can be tricky.

    We are actually getting new flooring this year and I plan of just replacing the skirting on top of the new floor for a cleaner finish



  • Registered Users, Registered Users 2 Posts: 599 ✭✭✭ottolwinner


    Looking for a place to recycle wetsuits and neoprene clothing.



  • Registered Users, Registered Users 2 Posts: 2,964 ✭✭✭tinofapples




  • Registered Users, Registered Users 2 Posts: 1,979 ✭✭✭Citizenpain




  • Registered Users, Registered Users 2 Posts: 4,178 ✭✭✭Bredabe


    Can anyone recommend any good online or in person(in the city) excel courses?

    "Have you ever wagged your tail so hard you fell over"?-Brod Higgins.



  • Registered Users, Registered Users 2 Posts: 1,886 ✭✭✭beans


    Any builder recommendations for a knock-through from sitting room to adjoining room? Thanks



  • Registered Users Posts: 53 ✭✭ctomas


    Anyone have house cleaner recommendations? Weekly for about 3 or 4 hours, in Claregalway area. PM me please!



  • Registered Users, Registered Users 2 Posts: 203 ✭✭cr-07


    Looking for someone who can supply and fit an EV home charger that is reasonably priced - Galway city area.



  • Registered Users, Registered Users 2 Posts: 355 ✭✭maniac2003


    Anyone able to recommend a good pest controller for south galway



  • Advertisement
  • Registered Users, Registered Users 2 Posts: 321 ✭✭MenloPete


    I've recommended Cathal from Westpest here previously. I presume he will travel to South Galway



  • Registered Users, Registered Users 2 Posts: 355 ✭✭maniac2003


    He doesnt cover south galway unfortunately



  • Registered Users, Registered Users 2 Posts: 4,178 ✭✭✭Bredabe


    Does anyone know where I can get a wheel for a Renault Twingo(the owner wants it as a spare)? Obvious sources cant get it,

    "Have you ever wagged your tail so hard you fell over"?-Brod Higgins.



  • Registered Users, Registered Users 2 Posts: 13,259 ✭✭✭✭flazio


    Like, a steering wheel? Or a rim and tyre? Breakers yards like Dempseys or Comerfords seems likely.



  • Registered Users, Registered Users 2 Posts: 759 ✭✭✭buzz11


    Where would I buy a 4 port RJ45 socket? like in this pic




  • Registered Users, Registered Users 2 Posts: 220 ✭✭Buddy74


    Try Flaherty markets https://maps.app.goo.gl/BSSy6VCG1XR7ee4TA



  • Advertisement
  • Registered Users, Registered Users 2 Posts: 4,178 ✭✭✭Bredabe


    "Have you ever wagged your tail so hard you fell over"?-Brod Higgins.



  • Registered Users, Registered Users 2 Posts: 696 ✭✭✭houseyhouse


    Does anybody know of anywhere in Galway that has a nice polished concrete floor? I’m thinking there might be a restaurant or bar that has it. I know the palace has one but it’s very rustic and I’d be interested to see others.



  • Registered Users Posts: 5,681 ✭✭✭obi604


    Looking for an electrician to fit a 2nd hand EV car charger.

    Its non smart so not availing of grant etc so just need any standard electrician



  • Registered Users, Registered Users 2 Posts: 5,264 ✭✭✭bobbyss


    Has anyone attended a basic car maintenance class in the city? Any recommendations?



  • Registered Users, Registered Users 2 Posts: 4,178 ✭✭✭Bredabe


    Looking for a DVR to take feed from 4 CCTV cameras. Where can they be found?

    "Have you ever wagged your tail so hard you fell over"?-Brod Higgins.



  • Advertisement
  • Moderators, Science, Health & Environment Moderators, Social & Fun Moderators, Regional West Moderators Posts: 60,561 Mod ✭✭✭✭Gremlinertia


    Looking for magnets, nothing fancy just little round or square whatever type for sticking notes to boards and whatnot. Was thinking office supply places but unsure



  • Registered Users, Registered Users 2 Posts: 599 ✭✭✭ottolwinner


    Youll find them in Mr Price and Dealz



  • Registered Users, Registered Users 2 Posts: 12,287 ✭✭✭✭ben.schlomo


    You can get Magnet Tape by the metre in Cregal Art, a regular scissors will cut it to size then depending on your needs.



  • Registered Users, Registered Users 2 Posts: 4,178 ✭✭✭Bredabe


    Where do ppl recommend for a good dentist for nervous patients of limited means, West City or within walking distance?

    Bonus points if there is at least one female dentist on staff.

    "Have you ever wagged your tail so hard you fell over"?-Brod Higgins.



  • Registered Users, Registered Users 2 Posts: 864 ✭✭✭Boardnashea


    I'm looking for CR1220 batteries. Have tried Mr Price and Dealz and a couple of supermarkets. Any other ideas? TIA

    For a nice little clip on reading light.



  • Registered Users, Registered Users 2 Posts: 321 ✭✭MenloPete


    Halfords, if you don't mind paying excessive prices. Otherwise, buy online.



  • Registered Users, Registered Users 2 Posts: 864 ✭✭✭Boardnashea




  • Moderators, Science, Health & Environment Moderators, Social & Fun Moderators, Regional West Moderators Posts: 60,561 Mod ✭✭✭✭Gremlinertia


    Try spar mainguard street, they look similar to the batteries I'd to get for my card reader, 3 or 4 euro I think



  • Registered Users, Registered Users 2 Posts: 8,411 ✭✭✭Gadgetman496


    If your card reader is from AIB they use CR2032 and will not work for the OP

    "Everybody is a genius. But if you judge a fish by its ability to climb a tree, it will live its whole life believing that it is stupid."



  • Moderators, Science, Health & Environment Moderators, Social & Fun Moderators, Regional West Moderators Posts: 60,561 Mod ✭✭✭✭Gremlinertia


    Well my thinking was similar large disc batteries might also be in stock



  • Advertisement
Advertisement