If you have a new account but are having problems posting or verifying your account, please email us on hello@boards.ie for help. Thanks :)

Hello all! Please ensure that you are posting a new thread or question in the appropriate forum. The Feedback forum is overwhelmed with questions that are having to be moved elsewhere. If you need help to verify your account contact hello@boards.ie

Case 4230 PTO Problem

DMcC69 · 2024-03-17 11:26:39

Hi My Case 4230 has developed a problem were the pto has became more difficulted too stop and now continues spinning all the time driving implements with force now even when switched off, is this the clutch pack warped or could it be something else?

Options

17-03-2024 12:26pm

#1

DMcC69

Registered Users Posts: 14 ✭

Join Date: June 2023

Posts: 8

Hi My Case 4230 has developed a problem were the pto has became more difficulted too stop and now continues spinning all the time driving implements with force now even when switched off, is this the clutch pack warped or could it be something else?

0

Comments

Options
#2 17-03-2024 8:12pm
JustJoe7240

Registered Users Posts: 1,471 ✭✭✭

Join Date: October 2014

Posts: 1433

First port of call, Is the linkage that engages and disengage the pto still attached?

0
Options
#3 17-03-2024 8:18pm
Silverdream

Registered Users Posts: 601 ✭✭✭

Join Date: June 2022

Posts: 581

https://www.boards.ie/discussion/comment/121906553#Comment_121906553

+1 on that. That Case series tractors suffer from worn and broken linkages especially in the gears.
It sounds like the pto is not being disengaged fully which can be caused by a worn linaged not giving enough travel. Cheap fix if thats all thats wrong.

0
Options
#4 21-03-2024 12:11pm
DMcC69

Registered Users Posts: 14 ✭

Join Date: June 2023

Posts: 8

ok would this wear be in the linkage outside the backend?

0