Advertisement
If you have a new account but are having problems posting or verifying your account, please email us on hello@boards.ie for help. Thanks :)
Hello all! Please ensure that you are posting a new thread or question in the appropriate forum. The Feedback forum is overwhelmed with questions that are having to be moved elsewhere. If you need help to verify your account contact hello@boards.ie
Hi there,
There is an issue with role permissions that is being worked on at the moment.
If you are having trouble with access or permissions on regional forums please post here to get access: https://www.boards.ie/discussion/2058365403/you-do-not-have-permission-for-that#latest

Good calving cameras / security cameras

1234568»

Comments

  • Registered Users, Registered Users 2 Posts: 8,471 ✭✭✭funkey_monkey


    I've been trying to figure out a way to view my camera directly on the TV. If you cast your mobile phone to the screen and hold it in landscape orientation you can view it - assuming you have a smart TV.

    Only drawback is that you need to control camera and all other interactions from your phone. Not ideal, but sufficient for me and saves having to get a chromecast or something else.



  • Registered Users, Registered Users 2 Posts: 8,471 ✭✭✭funkey_monkey


    Did that work? If not, you might need to get a wifi bridge - if you have line of sight.



  • Registered Users, Registered Users 2 Posts: 677 ✭✭✭ABitofsense


    I see on TAMS you can apply for livestock cameras. Anyone ever do this?

     Livestock monitoring camera. These are costed per camera installed. Enter the number of Livestock monitoring cameras installed into the investment tab on the on-line system

    Livestock monitoring camera per camera €432.00

    I have 2 very cheap Aliexpress PTZ cameras for last few years but starting to struggle now. I get 60% grant so they would make the top brands cheaper now.



  • Registered Users, Registered Users 2 Posts: 8,471 ✭✭✭funkey_monkey


    What's the limit? That seems like a nice wedge off them.



  • Posts: 0 [Deleted User]


    Digging up this thread....

    Is 48.com still the best value of the Three linked networks?

    I would like to explore setting up Wifi in an area that has no power, so I can use Wifi cameras instead of 4g. Where do I start 😳 I am presuming 12v power from a battery topped up by solar panel... Then it's all Chinese to me



  • Registered Users, Registered Users 2 Posts: 6,250 ✭✭✭emaherx


    Probably, it's unlimited data now too not just 100GB


    100GB plan still available if you are an old customer 10.99

    Unlimited is 12.99



  • Posts: 0 [Deleted User]


    Yeah, I have two of the 10.99 ones already, guess I'll have to be a big spender and get a 12.99!



  • Registered Users, Registered Users 2 Posts: 1,054 ✭✭✭dmakc


    We're looking to upgrade from our ancient fixed cameras, maybe include a PTZ one. My worry is currently it works well in that all of us on the farm can log into app and watch cameras simultaneously on our phones, given the manual aspect of PTZ cameras, is it still possible for multiple users to view at once?



  • Registered Users, Registered Users 2 Posts: 4,246 ✭✭✭orm0nd


    Yes



  • Advertisement
  • Registered Users, Registered Users 2 Posts: 677 ✭✭✭ABitofsense


    Yes, I would have myself and my father setup on the app for the cameras. Plan to have herself setup too from a safety point too at calving.

    On the PTZ camera, I've changed this year to Reolink PTZs (from cheap Ali-express ones) and i would highly recommend them. I had the same concern as my father isn't too technology smart (struggles to understand how I can view the camera when I'm travelling with work) but you can set positions with the app for the camera to go which is handy for my father as he just taps a button and it will move to say the calving pins, tap again for slats. Game change for me as father struggles with figuring out how to move the cameras.



  • Registered Users, Registered Users 2 Posts: 1,054 ✭✭✭dmakc


    Hi emaherx. I've fallen into this trap just got 3 x 2.4ghz PTZ cameras today, and have the KuWFi bridge (5ghz) coming tomorrow, are you saying there's no way these cameras will work for me in the shed due to this

    I had hoped for simplicity, plug the cameras in and let them work off the bridge's wifi, so I can view them in the phone app. Novice at all this.



  • Registered Users, Registered Users 2 Posts: 6,250 ✭✭✭emaherx


    What cameras did you get? Do they have a wired Ethernet option?

    The simplest and best option if available is to wire cameras via a small network switch.

    Alternatively you need to connect a 2.4ghz access point, these are cheap, possibly even free as many old ISP routers can be reconfigured for this task.



  • Registered Users, Registered Users 2 Posts: 1,054 ✭✭✭dmakc


    Got EZVIZ, nothing too technical was going for simplicity like I say;

    The cameras have ethernet cable slots, assuming the purpose of the switch would be to collect the three camera ethernet cables at one end, and the other end to the bridge?

    On the 2.4ghz access point, is that an alternative to the bridge (like a WiFi sim deal) or complimentary to it?



  • Registered Users, Registered Users 2 Posts: 515 ✭✭✭tiegan


    I am looking at the same scenario - have eufy cameras in shed, they connect with the homebase that is 2.4GHz - Homebase has ethernet cable slot, are you saying that I cannot plug that into the 5GHz bridge? What do I need to link the two? I was hoping to go with the wifi option originally but obvs that is not going to work!! Thankyou



  • Registered Users, Registered Users 2 Posts: 6,250 ✭✭✭emaherx


    Yes the switch is to connect them together, you can get a 5 port switch for 15 to 20 Euro. You can't splice network cables together as the digital data would all collide and nothing would get through, the switch acts as a sort of traffic management allowing each device to communicate in turn.

    The access point option is similar to the switch, connected to the shed bridge device by wire but the cameras wirelessly. Costs from about 30 euro.

    By the time you get the switch and cables, wired might be a little more expensive, but much simpler to configure and more reliable with less wireless links especially if you get the cables pre-made with the connectors on them. The wired option will have better performance than wireless when it comes to moving a PTZ camera, the more wireless links in a connection the greater the potential lag.


    No, in this setup you only have one wired connection so it can go directly to port on bridge device, you only need the switch to connect more than one wired device. Your "HomeBase" I guess is some kind of DVR that connects wirelessly with the cameras, this would be more like using an access point.



  • Advertisement
  • Registered Users, Registered Users 2 Posts: 515 ✭✭✭tiegan


    For anyone interested in getting wifi to a shed/barn/outbuilding - I bought this wireless bridge recently on amazon at half price and the 50% off voucher is back. 60e and free delivery with prime. I found them very easy to set up for a non tech savvy, non diy type of gal - All I used was cable ties and couldn't be happier with what I bought.

    https://www.amazon.co.uk/dp/B0BGHL5M6G?ref=ppx_yo2ov_dt_b_product_details&th=1



  • Registered Users, Registered Users 2 Posts: 8,471 ✭✭✭funkey_monkey


    Looking now to put a camera at an outfarm to monitor stock and machinery stored in sheds. Are fixed cameras preferable to PTZ in remote locations or should the motor facilities of the PTZ still be fine?

    Thinking of installing 1 or 2 cameras on site - with the ability to relocate one between summer and winter to overlook shed pens in winter and fields in summer.

    Maybe one with alerts enabled so that I'd know if there was anyone in the yard.

    From previously looking into this, I'd need the cameras, POE switch, leisure battery with trickle charger (on mains on site), and some type of sim card router.

    Anyone done this or able to provide more information on the setup?



  • Registered Users, Registered Users 2 Posts: 1,655 ✭✭✭148multi


    Neighbour has spypoint, will have to ask for further information, land is about 5 miles away.



  • Registered Users, Registered Users 2 Posts: 8,471 ✭✭✭funkey_monkey




  • Registered Users, Registered Users 2 Posts: 4,343 ✭✭✭arctictree


    I set this up before for a local farmer for a remote shed with no power and no internet.

    I got a 4G wireless router from vodafone. About €25 a month. Then a leisure battery with a small inverter. Plug the cameras and the router into the inverter. You'll need to either switch the battery periodically or have some way of recharging it (solar etc).



  • Advertisement
  • Registered Users, Registered Users 2 Posts: 6,250 ✭✭✭emaherx


    No doubt it works, but all of the devices in question are DC powered, so an inverter shouldn't be needed as it would be somewhat inefficient converting power to 240 AC and then back to 5 - 12V DC. Some DC-Dc converters would cover anything using anything other than 12V. Most charge controllers have 5V supplies also.



  • Registered Users, Registered Users 2 Posts: 6,250 ✭✭✭emaherx


    If you are going to run the system off of battery, you may be as well of forgetting the POE switch and use 12V cameras that support passive POE, that way they can be powered directly off the battery and still use the network cable for power. There is a simple Y splice cable to separate power and data.

    No reason you can't use PTZ other than they will use more power. You can get stand alone battery/solar PTZ cameras either.



  • Registered Users, Registered Users 2 Posts: 4,994 ✭✭✭enricoh


    Good cameras paid off for these lads in Dublin. Scum had flown in n 100k worth of gps gear robbed in 2 days.



Advertisement