Advertisement
If you have a new account but are having problems posting or verifying your account, please email us on hello@boards.ie for help. Thanks :)
Hello all! Please ensure that you are posting a new thread or question in the appropriate forum. The Feedback forum is overwhelmed with questions that are having to be moved elsewhere. If you need help to verify your account contact hello@boards.ie
Hi there,
There is an issue with role permissions that is being worked on at the moment.
If you are having trouble with access or permissions on regional forums please post here to get access: https://www.boards.ie/discussion/2058365403/you-do-not-have-permission-for-that#latest

G27 / G16 grip fit a dboys cqb/r

Comments

  • #2
    iceage
    Registered Users, Registered Users 2 Posts: 3,533 ✭✭✭iceage


    Well I know for a fact that the G27 grip does NOT fit a D boys M4 A1 defo. :D
    Cos I tried and failed miserably.

    I should say it fits the AEG, but the motor won't reach far enough into the mechbox
    to engage with this grip on it.


  • #3
    bluestripe93
    Registered Users, Registered Users 2 Posts: 1,104 ✭✭✭bluestripe93


    iceage wrote: »
    Well I know for a fact that the G27 grip does NOT fit a D boys M4 A1 defo. :D
    Cos I tried and failed miserably.

    I should say it fits the AEG, but the motor won't reach far enough into the mechbox
    to engage with this grip on it.
    what about this grip its a dboys one http://cgi.ebay.co.uk/Dboys-Boyi-SPR-motor-grip-Black_W0QQitemZ370168437140QQcmdZViewItemQQptZUK_SportingGoods_Hunting_ShootingSports_ET?hash=item562fc21994&_trksid=p3286.c0.m14&_trkparms=72%3A2109|66%3A2|65%3A12|39%3A1|240%3A1318|301%3A1|293%3A1|294%3A50 would it fit do you think??


  • #4
    iceage
    Registered Users, Registered Users 2 Posts: 3,533 ✭✭✭iceage


    I take it being a D Boy product that it should.....if it does let us know! :)


  • #5
    bluestripe93
    Registered Users, Registered Users 2 Posts: 1,104 ✭✭✭bluestripe93


    iceage wrote: »
    I take it being a D Boy product that it should.....if it does let us know! :)
    yea ill probally get that one, is the motor held in place by anything or is it just the grip holding it in place,how does the grip come away from the body is it easy to remove to change


  • #6
    iceage
    Registered Users, Registered Users 2 Posts: 3,533 ✭✭✭iceage


    Was gonna go into it blow by blow then my keyboard threw a wobbly!! but check this out this will show you step by step how to remove the original grip and the motor, get yourself a decent longnose pliers, longish philips screwdriver. Best of luck, let us know how you get on, I still fancy changing the grip on my own you see. Oh decent torch, to look down into the grip when loosening/tightening the screws, don't over do them, they will pull through the plastic if you go too far and remenber the position of the connections on the motor. Positive is normally marked with red.

    http://www.mechbox.com/site/m4/m16-u...bly-video.html :)


  • Advertisement
Advertisement