Photos of your Airsoft equipment.(NO DISCUSSION)

defenderdude

KA Sig 556 with UBR stock... debating as to paint if any.





and latest member of the family...
G&G AK47. thinking about some blackening process finishes for the metal...:rolleyes: but I really like the wood (even tho I'm sure it's not correct)although I shaded it a bit darker than I'd intended. Added ageing and slight damage details.

Have to say (speaking as a self confessed M4 wh0re) - when it comes to sheer beauty - the AK with it's wooden furniture is a fab bit of kit. Makes me wanna get a K98 and do it as a wall hanger...

Masada

I got to do a little modding to "Soap McTavor" as he's known nowadays, added a pair of rails and some dremeling, drilling, effing and blinding later, I have an ACOG on there and an RIS mountable MARS too.

I also beefed up the mag catch a bit, (Puding, yore trick worked very well. ) and I added a longer barrel, I think the barrel really makes it look a lot better.



Took ages to get this in just the right spot, I wanted it as close to the barrel as possible while still clearing the Irons, Its a nice long rail and the Eotech actually fits perfectly in front of the magnified ACOG so you can have a magnified Eotech.

kimmyt1987

Barrett 50 Cal I bought for the other half for Christmas!!!! :P

Masada

Its been a bit quiet in here and i felt like messing with the camera earlier so here goes.

This is the A&K Masada and a VFC Scar, (The Masada looks like a much nicer finish despite only being a cheapo clone. its also wearing the original sight from the Tavor, I like how it looks on here.

Stercus Accidit

Masada

Just for you 22.Lover,

You sail you like the long barrels, so i took it to the extreme.

Started by adding another few inches of barrel,


Then, slapped on a silencer aswell,


Then a 20rd Pmag, and a scope.


Tavors, Not as "CQB" as their made out to be, Bullpup heaven.

gerrowadat

Just collected the shorty 416 from defenderdude, and have to say it looks well.

Got it home and stuck some bits on it, have a few more coming, but this is the CQB monster for the moment:

(Apologies for poor image quality, the cable for my camera has gone AWOL, so iPhone had to do).




The stock gun is a JG 416 crane stock, no rewiring necessary :-) with a grip I'm unsure of the name of (Richie, the dirty southpaw, stuck it one one day during repairs). M120 motor, guarder hopup. Runs beautifully on a 9.6 (which is more than I can say for the VFC). It's got a VFC AN-PEQ on it, with a magpul pressure switch mount.

Additional bits to come are a tan eotech of some variety (haven't ordered yet), and a set of DE PMAGs with ranger plates. Can't be using black PMAGs in this baby. Dirty dirty.

Considered a tighbore barrel, but a little redundant in CQB.

Will post more when finished.

Stone.cold

Meet the Beast:

carentankiller

Its been awhile since I last posted in here so here is a few new additions I have made to my collection over the last couple of months.


WE SCAR-L Gas Blowback Rifle (Tan)



WE Scar Field Stripped



With Gemtech Halo Silencer



AGM M4A1 RIS Gas Blowback Rifle



Classic Army M15 / M16A1 Vietnam






CyberGun GSG-5 MP5 RIS [Full metal with Electric Blowback]






Double Eagle M56A Full Stock Shotgun



Taurus PT99 Co2 - Extended Mag [Semi & Full Auto] [Full Metal]



KJ Works Colt 1911 (Full Metal) Co2
KJ Works Sig Sauer P229 (Full Metal)
Taurus PT99 Co2 - Extended Mag [Semi & Full Auto] [Full Metal]




Some more Pistols..







And a Big Thank You to Aidan (defenderdude) for respraying my Maruzen Type 96 stock Nato Green great job!







(I am sorry for the huge pictures for those using a smaller monitor size)

Here is a slide show to make it a bit easier to view the pictures

Slideshow 1

Slideshow 2

birdman 1979

Super Aug, it a JG, tight bore, clear hop up rubber. havent gone near the gear box yet. M203, king arms mount and a elcan X4 sigh

birdman 1979

Aug, G&G raider, CA mp5 and a TM MEU. Runners by adidais:P

TerrorFirmer

Small collection, keeps changing all the time, gone through so many pistols and rifles but always seeking that special one - prefer to keep a collection to a minimum of 1xPistol, 1xSMG, 1xShotgun, 1xAssault, 1xSniper...

And yes I really have to stop using phones for pictures. And including stuffed animals in pictures...it's not mine. No...really.

murph665

<snip> - no discussion , and please do not quote nearly a full page of pics to ask a question - The Master

thermo

tm styer a2
h-bar kit
590mm 6.03 barel
saving for an elcan,,,,,

Attachment not found.

Frank the Manc

KWC CO2 Mini Uzi
Green gas conversion
Nine Ball Piston Head
Custom built Steel & Aluminium Supressor
RS Uzi Sling
Uncle Mikes QD Swivels

Leftyflip

My new pistol courtesy of Hairyman, must say it's a lovely piece.

Puding

some people may remember a long long time ago when we where waiting for the release of the vfc eglm i was waiting for for the eglm before getting myself a scar heavy, well hear you go, puding finally went tan ( well FDE :P ) with the help of andros over at quality airsoft (dame you Shannon customs making life hard grrrrr ) , more pictures will follow as a picture review at redbadger.org when the light is a little better






also managed to track down a masada short barrel and a couple of the nre pmags relicas for photos, brass is a little too shinny but nothing that can not be fixed

o1s1n

I'm probably the only person in Ireland that this is a big deal to, but I'll post it up anyway. :pac:

After a year or so, I've finally by some freak chance managed to find a second magazine for the JAC L1A1! And to top it off, it didn't have a rifle attached to it. It's an actual spare magazine. These things are rarer than gold.



At this rate I should be able to skirmish it in about 6-7 years.

Sod'o swords

Well boredom and spray paint got the better of me again, and, the the g36 was eyeing me up.

Plus i had a can of Coyote brown paint from SE airsoft.

Here's the end result...




Then another addition to the family is what was Masada's HFC USP, which i recently lost the mag to, so if pretty much worthless. But you can enjoy the multicam anyway.



Next up is the recently made popular Warrior R.I.C.A.S Compact from Uk tactical.
It'll be given it's train run tomorrow at ROE



Then Finally to cause a stir, i don't have any pictures of myself in my US Army loadout, but here's the Interceptor Vest and helmet, not only is it ACU, but yes, Surrounded by Multicam. There's no way to avoid the slagging now.

thermo

m700 with ww1 lee enfield wood (not fitted yet)

Attachment not found.

moggser

A little something i thought i'd share its not finished yet needs a few rails and a eotech and stuff














and here is the Lad's

T4RGET

WE baby Hi capa 3.8:D still need to get pic of SCAR but...

swiftblade

The new member of the family

Well L96



I would like to thank Steve who made it all possible

Phractal

****. Images turned out massive. Apologies.

Phractal

Putting up more pics now, hope they dont turn out HUGE.

- First two pics (tried to resize, hope it works!) are various of my KJ Works CO2 powered, Gas Blow Back Colt M1911 A1 Airsoft pistol. Its fairly goddamn realistic, full trades, all functioning safeties, big bang, heavy, full metal. I like it. Its my current airsoft slingbacker. Its been well worn in - I can zoom in to every scratch and chip on it- and I know every one well lol. People REALLY dont like being shot at with it - the intimidation factor is HUGE. A MASSIVE bang, fearsome kickback, a cloud of CO2 erupting from the barrel... And a high speed BB packing a whole ONE JOULE (LOL) of muzzle energy screaming toward them. It is being replaced as my primary sidearm by a KWA Glock 17 soon - my hands fit the Glock better.





Now. My Jing Gong H&K G36c.
VERY beautiful gun, got her today. Have not tested her much.

She has good realism, very solid. Its all thanks to Tony

I love her. I am gonna name her after her first skirmish.

See for yourself

Stone.cold

Ya cant hunt in the alley without one



Watch out Zombie i have a new way to bring the pain



1911 full metal Springer, Nice

Puding

playing about with optics for the scar heavy



mw2 look, turned out to be rather practical

Airsoft247

All i have at the moment a G&G Ump And a A&K M249


[IMG][/img]http://www.societyssorrow.com/_crunch/airsoft/M249/001.jpg
[IMG][/img]http://smokedtires.com/forums/forsale/UMP1.jpg

The Saws for SALE!!!!!

Private Snafu

My new M4-S System with EoTech replica and silencer


My CA8-2, got it off hairyman a while ago, gorgeous rifle!


And my own current Project 90

Leftyflip

A big thanks to Aidan (Defenderdude) who painted my 1911, really appreciate it!:)